No responsibility is accepted for the accuracy of this information!!!
Robomow Service Settings
- Get into Service Settings with iOS App: Service Settings, Enter code, open Service Settings
Service Settings
- Mowing Motor
- Bumper
- P239: Sensitivity (mA)
- Default value: 1200
- Values: ???
- Optimal value: 800
- P240: Time – Detection time of an obstacle
- Default value: 2
- Values: 1-5
- Optimal value: 1
- Drive current change
- P258: Sensitivity (mA)
- Default value: 350
- Optimal value: 300
- P259: Time
- Default value: 2
- Optimal value: 1
- P270 – Edge mowing in Eco Mode (Recommendation: ON)
- Default: OFF
- Values: ON / OFF
- Optimal value: ON
- P258: Sensitivity (mA)
- P239: Sensitivity (mA)
- Temperature
- P257 – Enable / disable the minimum temperature at which an automatic start is prevented
- Default: ON
- Values: On / Off
- Optimal value: ON
- P281 – Setting the minimum temperature
- Default: 5°
- Values: -10°- +10°
- P257 – Enable / disable the minimum temperature at which an automatic start is prevented
- Base Station
- P201 – Detect Distance (meters)
- At what distance before LS ” near wire follow ” is deactivated via Bluetooth
- Default: 5 meters
- Values: 1 – 10 meters
- P202 – Telemetry (on/off)
- Default: On
- P203 – Search Capacity (mA/h)
- minimal capacity to start search for base station
- Default: 1000
- Values: 500 – 2000
- P263 – Search voltage – Zone Main (mV)
- minimal voltage to start search for base station
- Default 3000
- Values: 2500 – 5000
- P207 – Back from Wire (When OFF it does not returns when he has found the wire. When ON, it moves the way back before he turns. With OFF Robomow turns always at the same distance to the wire which could create lanes in the lawn .)
- Default: ON
- Values: ON, OFF
- P208 – Return way of P207
- Values: 1-50cm
- Default: 40cm
- P201 – Detect Distance (meters)
Hello. This is very useful! I tried it at rc304 model. Thanks! Do you know any more service codes ? I’m looking for the possibility to mow once on remote, as I have 50 santimeters area near the flower plant and I can’t use wire to serve it. Thanks in advance! (Sorry for wrong comment in thread) 😉
Hello, great information’s! But can not change any parameter at service menu. I’m able to see all parameter, but no function when I’m touching the parameter. I’m using MC300.
Do you try to access the menu with an Android device or an iPhone?
I used Android.
Too bad. Modifications are only possible on the iPhone app as far as I know. You have to change the settings manually with the numbers directly at the Mower. But you could use the Andoid app the see what setting is behind which number.
press the “Setting” and “Home” button for 3 seconds. Enter the required code.
Thanks for you help, do you have a detail description for all settings?
It would be nice, if you could send me a detail description for the service menu?! I’m looking for it for some time but cannot find any “new” documents 🙁
Hello. This is very useful! I tried it at rc304 model. Thanks! Do you know any more service codes ? I’m looking for the possibility to mow once on remote, as I have 50 santimeters area near the flower plant and I can’t use wire to serve it. Thanks in advence!
Hello, App in the iOS version 1.80, there is no service settings more. I own the Robomow RS635, perhaps it is also because of the RS635.
Try to change the language of the app to english.